1/2" JACOBS HPP METAL KEYLESS DRILL CHUCK FOR MILWAUKEE 2703-20 AND 2703-22

Description

1/2" JACOBS HPP METAL KEYLESS DRILL CHUCK
FOR MILWAUKEE 2703-20 AND 2703-22
This is Jacobs latest generation of HPP (High Performance Products) with superior performance.
Upgrade your old chuck to this latest Jacobs chuck with
Carbide Tipped Jaws
This chuck fits the Milwaukee 2703-20 AND 2703-22 M18 Fuel Drill-Driver
Replaces chucks 42-66-8003, 42-66-0091, 42-66-0090
All Metal Chuck
Capacity: 1/2" diameter bits
Carbide tipped jaws
Chuck Diameter: 1-11/16" at base
Chuck Length: 2-1/8" with jaws retracted
Spindle Mount:
9/16-18
right handed thread
Single Metal Sleeve keyless hammer drill chuck
Metal sleeve HPP - Recommended for professional grade 12-24 volt DC Rotary
Hammer Drills
Carbide jaw bite
reduces bit slippage and enhances wear resistance in the most demanding applications.
Another quality product from Jacobs
Jacobs patented Hammerlock® technology provides a positive locking mechanism which prevents loosening in hammer and other high vibration applications.
Jacobs patented Anti-Lock prevents chuck from locking open.
Single sleeve version to provide a larger gripping surface and one-handed tightening.
"HandTite", "SplitBite", and "HammerLock" are all Trademarks of the Jacobs Chuck Mfg Co.
CHUCK REMOVAL INSTRUCTIONS
FROM
MILWAUKEE
FOR THE 2703-20 HAMMER-DRILL
REMOVING THE CHUCK SCREW: Set the Speed Selector Slide to the #1 setting.
With the aid of a small pencil tip torch (or use an air reduction nozzle on a heat gun) apply heat into the chuck opening, directly to the head of reversing screw just prior to removing the screw. Place a T40 1/4” Torx bit into the head of the reversing screw and place a 1/4” boxed end wrench over the hex on the T40 bit. It is recommended to use a 12”-18” metal tube or pipe as leverage over the boxed wrench. In a clockwise direction apply a slow, steady force on the ‘cheater bar’ to break the screw loose.
REMOVING THE KEYLESS CHUCK: Tighten a 1/2” or 10mm Allen or Hex Key into the jaws of the chuck. Place the tool into a vise with soft jaws (this will require that you remove the belt clip from the tool). It is recommended to use a 12”-18” metal tube or pipe as leverage over the Allen or Hex key. In a counter-clockwise direction apply a slow, steady force on the ‘cheater bar’ to break the chuck loose.
INSTALLING NEW CHUCK AND SCREW:
Torque Chuck to 1095 kg/cm (950.418 in/lbs or 28.93 ft/lbs)
Torque Screw to 461 kg/cm (400.130 in/lbs or 33.34 ft/lbs)
Sold by an longtime ebay seller.
All purchases are carefully packaged and normally shipped within one day of payment receipt.
ALL CONTENT: COPYRIGHT "elytools" 2021
Thank you for your interest!
Please let us know if you have any questions or need additional information. We want you to be happy with your purchase!
Payment
All items must be paid for within 3 days of the auction ending.
Shipping & Handling
Buyer to pay all shipping and handling charges. International selling will be through the ebay Global Shipping Program only. International buyers must be from eligible countries and will be responsible for all Program Fees as determined through the Global Shipping Program. Please see the postage calculator with the destination zip code to determine your charges. We do not ship to APO/FPO Military addresses. We only ship to a confirmed mailing address.
Returns
Buyer to contact seller within 14 Days of receiving the item. Buyer pays all shipping costs. Credit will be issued only for items returned in unopened original packaging. Buyer to notify seller and provide tracking information prior to returning any item.
ALL CONTENT: COPYRIGHT "elytools" 2021